Sonix MCU  (45)
Elan MCU  (51)
RF芯片  (12)
HD EEPROM  (1)
Metal link  (1)
优势M0  (3)
HD FLASH  (14)
直流马达  (2)
优势FLASH  (12)
EM78P259N

  The EM78P259N is an 8-bit microprocessor designed and developed with low-power and high-speed CMOS technology. The device has an on-chip 2Kx13-bit Electrical One Time Programmable Read Only Memory (OTP-ROM). It provides a protection bit to prevent intrusion of user's code. Three Code option words are also available to meet user's requirements. 
With its enhanced OTP-ROM feature, the EM78P259N provides a convenient way of developing and verifying user's programs. Moreover, this OTP device offers the advantages of easy and effective program updates, using development and programming tools. User can avail of the ELAN Writer to easily program his development code.

  • CPU configuration
  • 2Kx13 bits on-chip ROM
  • 80x8 bits on-chip registers (SRAM)
  • 8-level stacks for subroutine nesting
  • Less than 1.9 mA at 5V/4MHz
  • Typically 15 uA, at 3V/32kHz
  • Typically 1 uA, during Sleep mode 
  • I/O port configuration
  • 3 bidirectional I/O ports : P5, P6, P7
  • 17 I/O pins
  • Wake-up port : P5
  • 8 Programmable pull-down I/O pins
  • 8 programmable pull-high I/O pins
  • 8 programmable open-drain I/O pins
  • External interrupt : P60
  • Operating voltage range
  • Operating voltage: 2.3V~5.5V (Commercial)
  • Operating voltage: 2.5V~5.5V (Industrial)
  • Operating temperature range
  • Operating temperature: 0°C ~70°C (Commercial)
  • Operating temperature: -40°C ~85°C (Industrial)
  • Operating frequency range
  • Crystal mode: 

DC~20MHz/2clks @ 5V, DC~100ns inst. Cycle @ 5V

DC~8MHz/2clks @ 3V, DC~250ns inst. Cycle @ 3V

  • ERC mode: 

DC~16MHz/2clks @ 5V, DC~125ns inst. Cycle @ 5V

DC~8MHz/2clks @ 3V, DC~250ns inst. Cycle @ 3V

  • IRC mode:

Oscillation mode : 4MHz, 8MHz, 1MHz, 455kHz

Internal RC Frequency Drift Rate
Temperature(-40°C ~80°C ) Voltage(2.3V~5.5V) Process Total
4MHz ±10% ±5% ±4% ±19%
8MHz ±10% ±6% ±4% ±20%
1MHz ±10% ±5% ±4% ±19%
455kHz ±10% ±5% ±4% ±19%

All the four main frequencies can be trimmed by programming with four calibrated bits in the ICE259N Simulator. OTP is auto trimmed by ELAN Writer. 

  • Peripheral configuration
  • 8-bit real time clock/counter (TCC) with selective signal sources, trigger edges, and overflow interrupt 
  • 8-bit real time clock/counter (TCCA, TCCC) and 16-bit real time clock/counter (TCCB) with selective signal sources, trigger edges, and overflow interrupt 
  • 4-bit channel Analog-to-Digital Converter with 12-bit resolution in Vref mode
  • Easily implemented IR (Infrared remote control) application circuit
  • One pair of comparators or OP
  • Six available interrupts:
  • TCC, TCCA, TCCB, TCCC overflow interrupt
  • Input-port status changed interrupt (wake-up from sleep mode)
  • External interrupt
  • ADC completion interrupt
  • Comparators status change interrupt
  • IR/PWM interruptn 
  • Special features
  • Programmable free running watchdog timer (4.5ms : 18ms)
  • Power saving Sleep mode
  • Selectable Oscillation mode
  • Power-on voltage detector (2.0V ± 0.1V)
  • Package type:
  • 14-pin DIP 300mil : EM78P259ND14J/S
  • 14-pin SOP 150mil : EM78P259NSO14J/S
  • 16-pin SOP 150mil : EM78P259NSO16AJ/S
  • 18-pin DIP 300mil : EM78P259ND18J/S
  • 18-pin SOP 300mil : EM78P259NSO18J/S
  • 20-pin DIP 300mil : EM78P259ND20J/S
  • 20-pin SOP 300mil : EM78P259NSO20J/S
  • 20-pin SSOP 209mil : EM78P259NSS20J/S

Note: Green products do not contain hazardous .substances.


 

上海俊硕电子科技有限公司 版权所有 © 严禁复制  2000-2014
电话:18101791225 传真:021-36360067 技术支持:上海频道
地址:上海市共和新路3737号共和国际商务广场B楼1709室   网站备案号:沪ICP备16018318号-1